30 Hits
0 Comments
30 Hits
The 24,000 RPM water cooled spindle is now fully operational on the Taig Micro-Mill. This 1 horsepower spindle is certainly far more power than is required. Cutting my wax masters it is operating at 1/10 hp. Gosh, only ten times more power available than needed. Nothing wasted though, as the VFD does a great job at regulating power consumption. It ...
52 Hits
52 Hits
The RDS store and my entire email system, business and personal, has been suffering with some very unusual problems. I have been using email from the day it was invented and I never had the problems I have experienced in the last few months. Email spam filtering and security has come off the rails. A real train wreck. I don't think it is going to g...
83 Hits
83 Hits
The Taig CNC Micro-mill is a smooth and accurate wax milling system for carving master models for my lost wax cast jewelry creations. Wax carving uses tools with end diameters down to 0.003 inches with step-over of only 20 percent. This requires five passes to cut the width of the tool. Wax carving requires a tremendous amount of movement action fr...
53 Hits
53 Hits
I have listed most of the common requested equipment packages and components produced by Taig Tools on the RDS website. This permits a customer to order directly from the RDS website with little delay. I stock the faster moving (selling) accessories here in Texas and can ship the same or next day. I do not stock complete machine packages. These maj...
107 Hits
107 Hits
The new payment system (Square) is working very well. Either because it is first on the list or that it simply isn't PayPal, it's getting ALL the use. That's fine with me. It must have been a good decision. PayPal can offer terms, that's monthly payments for those interested. Otherwise, either system system works for me or you.
80 Hits
80 Hits